Loft Centre Bergen Wooden Space Saver Stair Kit

An increasingly popular choice, Spacesaver stairs are an ideal solution where space is limited. Taking up about half the space of a standard flight, the unique tread shape overcomes the problem often associated with steep stairs, enabling comfortable descent facing forward with plenty of foot room. Although in use for many years, the alternating tread stair was actually included in the Building Regulations (Part K) in 1992. However, as with all stairs, it is advisable to confirm with the local Building Control Department their suitability for any given project.

• The Bergen Space Saver Stair kit is available in two width sizes (545mm & 660mm).
• 10 to 14 tread models available to help achieve your desired floor height.
• Stair and tread angle adjusts on assembly to suit variable floor heights.
• Comfortable to ascend and descend facing forward.
• Easy to assemble and install using simple drilling template provided.
• Constructed from high quality pine treads and strings.
• Minimal opening length required, between 1200 and 1600mm approx - (dependant on stair steepness and joist thickness).
• Optional quarter landing kit available to allow a 90° turn.
• Optional ranch rails available (allow an extra 30mm to the width of the Stair for each rail fitted).
• 1/2 risers in pine (fitted under the tread) are available to comply with building regulations if required.

 

Bergen Stair Kit - Technical Information
String Measurements		Tread Measurements
Width	360mm	Depth	240 / 110mm (off set)
Thickness	32mm	Thickness	40mm
Length	3900mm	Width	481mm or 596mm

Bergen Stair Kit - Dimension Guide
Product Code		Treads	Floor to Floor *	Going (min) **	Going (max) **
				62° Angle	60° Angle
Bergen 545	X	10	Up to 2420mm	1240mm	1350mm
	X	11	Up to 2640mm	1350mm	1470mm
	X	12	Up to 2860mm	1460mm	1590mm
	X	13	Up to 3080mm	1570mm	1710mm
	X	14	Up to 3300mm	1680mm	1830mm
Bergen 660	X	10	Up to 2420mm	1240mm	1350mm
	X	11	Up to 2640mm	1350mm	1470mm
	X	12	Up to 2860mm	1460mm	1590mm
	X	13	Up to 3080mm	1570mm	1710mm
	X	14	Up to 3300mm	1680mm	1830mm

* The Floor to Floor measurements in the above table assume that the top tread is one rise
   down from the top floor level.
** The Going measurements featured in the above table are approximate dimensions and they
   conform to Building Regulations.

All balustrading options comply with the 100mm gap rule, with the ranch rail having three horizontal rails not two as shown on the picture.